TM13011X19 John Deere 318E, 319E, 320E, 323E Skid Steer & Compact Track Loaders Pdf Repair Service Technical Manual
TM13011X19 John Deere 318E, 319E, 320E, 323E Skid Steer & Compact Track Loaders Pdf Repair Service Technical Manual
⭐⭐⭐⭐⭐ 50+ Reviews
Couldn't load pickup availability
Hardware Restoration for FT4-Generation John Deere E-Series Loaders
As the John Deere E-Series matured, the 318E, 319E, 320E, and 323E platforms were updated to accommodate Final Tier 4 (FT4/S4) engines and enhanced Electro-Hydraulic (EH) systems. These updates required modifications to the rear chassis, engine mounting sequences, and hydraulic routing. Consequently, older repair documentation will not provide accurate assembly sequences for these later-model loaders. When your FT4-generation mixed fleet requires a major physical overhaul—such as pressing new wheel seals on your 318E or rebuilding the track tensioners on your 323E—the John Deere 318E, 319E, 320E, 323E (EH Controls) Repair Service Technical Manual (TM13011X19) is the exact structural guide required for the job.
Distributed instantly via Manualsmarket.com, this highly specific mechanical resource allows shop personnel to confidently dismantle and reconstruct both wheeled and tracked configurations, ensuring every bolt and bushing meets the original engineering standards for these late-model chassis designs.
TM13011X19 Factory Specifications
| Equipment Identity | Documentation Scope |
|---|---|
| Model Coverage | 318E, 320E (Skid Steers) & 319E, 323E (Compact Track Loaders) |
| Platform Configuration | EH Controls with FT4/S4 Emissions Engines |
| Official Document ID | TM13011X19 |
| Primary Application | Mechanical Wrenching, Component Disassembly, and Hardware Rebuilding |
| Digital Format | Printable, Searchable PDF |
Mechanical Integrity & Teardown Blueprints
This repair guide ignores software logic and digital diagnostics entirely, focusing 100% on the heavy iron and physical force components of your mixed fleet.
- Track Loader Undercarriages (319E & 323E): Manufacturer procedures for relieving track tension, extracting heavy rubber tracks, unbolting planetary drive units, and replacing bottom rollers without damaging the track frames.
- Wheeled Chain Compartments (318E & 320E): Step-by-step instructions for opening the heavy side enclosures, managing drive chain deflection, and physically pressing out worn axle hubs to install fresh bearings.
- Boom Geometry & Linkages: Factory methods for safely driving out stubborn lift cylinder pins, evaluating the wear limits on vertical-lift linkages, and reconstructing the front quick-attach plate.
- FT4 Powerplant Extraction: The exact physical sequence required to safely tilt the cab, disconnect the late-model cooling stack, release the heavy-duty engine mounts, and hoist the FT4 diesel block from the frame.
Who Benefits From This Specific Shop Manual?
- Emissions-Compliant Fleet Operators: Maintain the physical integrity of your late-model FT4 tracked and wheeled loaders using a single, accurate documentation source.
- Heavy Equipment Restoration Shops: Purchase high-hour E-Series units at auction and execute profitable, factory-correct structural rebuilds using verified hardware assembly orders.
- Dealership-Level Independent Techs: Take on complex mechanical jobs like chain case overhauls and tandem pump extractions without second-guessing fastener torque limits or component sequencing.
Workshop Floor Inquiries
Will this PDF explain how to remove the EH hydrostatic drive pumps?
Yes. The manual covers the complete physical unbolting process, detailing how to safely disconnect the hydraulic lines and linkages to extract the tandem pumps from the belly pan.
Can I use this manual for my 320E that has manual hand-and-foot controls?
No. This specific document covers the physical layout and component mounting for models equipped with EH (Electro-Hydraulic) controls. Manual control models require a different repair manual due to vastly different mechanical cab linkages.
Are the wiring diagrams for the FT4 engine sensors included here?
No. Wiring schematics and electrical circuit testing are strictly reserved for the diagnostic manual. This guide is dedicated to hardware disassembly.
Is this guide helpful for replacing a leaking bucket tilt cylinder?
Absolutely. It outlines the exact mechanical teardown, internal barrel seal replacement, and physical reassembly procedures for both the lift and tilt cylinders.
Equip Your Maintenance Bay
Don't risk snapping bolts or installing components incorrectly. Download the John Deere 318E, 319E, 320E, 323E (EH Controls) Repair Service Technical Manual TM13011X19 today to arm your mechanics with the factory-authorized structural blueprints.
